Proper ventilation in steel buildings

Proper Ventilation In Steel Buildings

Proper ventilation is an important feature in any steel building system. Buildings constructed of any material need ventilation, but adequate ventilation of a steel building is especially critical. Steel buildings are very susceptible to condensation, so be sure to confirm that your steel building manufacturer or supplier can provide any and all devices needed to properly ventilate your structure. These devices may include louvers, circular vents, and ridge vents.

The amount of ventilation that a steel building requires is dependant on the dimensions of the building, the location of the project site, and the intended use of the building. A ten foot ridge vent will serve up to 2400 square feet of interior space. Heavily occupied buildings that house a lot of people or livestock or certain items require calculations to correctly determine the proper ventilation. Cross ventilation is also vital, and louvers placed near the base of the building help make a ridge vent on the roof more effective.

Be sure that the ridge vents are appropriate for the building size. Ideally, ten foot vents with nine inch throats should be used, preferably forged of heavy duty 26 gauge steel. Most ridge vents are provided in a mill finish (unpainted) or in white. Each ridge vent should come with a rain cap, a bird screen, and an adjustable adaptor. A connector bar and gutter splices are also needed for installing multiple units in a continuous run for larger buildings. And finally, choose the ridge vent that is appropriate for the roof pitch.

Circular vents, also available painted or unpainted, are generally twenty inches in diameter. Each vent should also include a bird screen and a butterfly damper that locks open until released. Flat based vents can be field installed or modified to fit snugly against the roof pitch.

Louvers are often the only ventilation required in smaller steel buildings, but they are frequently used to facilitate proper cross ventilation in larger structures. Louvers are generally available in 3?x3?, 3?x4?, and 4?x4? sizes. They may be painted or unpainted, and include a bird screen, and sixteen gauge frames along with twenty gauge fins. Any unobstructed area of a wall can accommodate a louver, but the design phase is the best time to carefully consider the optimal placement for them.

Any qualified steel building manufacturer or supplier will offer you professional advice about the proper ventilation of your structure. The precise location of ridge and circular vents is important to determine as early as possible in the planning project. Before you even purchase the building, you and the manufacturer should understand the ventilation requirements for your building project to help ensure a comfortable environment.

Yuko hair straightening technique

Yuko Hair Straightening Technique

This permanent hair straightening technique originates in Japan. It uses heat as a way of reconstructing the bonds in your hair allowing it to lie flat, straight, glossy and smooth. This system works on most hair types (expect afro) and your hair needs to be a minimum length of four or five inches.
The straightening treatment brought to you by the Yuko hair straightening system can dramatically change the look and feel of your hair. It actually leaves your hair in better condition despite the fact it is done using chemicals. Although this treatment is permanent you may wish to repeat the process every six to 10 months depending on the rate of your hair growth.
Many people are worried about undergoing procedures such as the Yuko hair straightening as there is a worry surrounding it about possible damage to your hair. Everyone knows that chemical substances on your hair can cause damage but in the case of the Yuko hair treatment this isnt the case. Yes this straightening procedure is performed using chemicals but damage shouldn’t be caused as long as the right products and procedures are used.
The majority of women in the UK straighten their hair on a daily basis, which is a process that on average takes 30 to 45 minutes to complete. This amounts to nearly 300 hours a year! The Yuko system takes three to five hours to work its magic, depending on the length and type of hair.
The Yuko system involves the following process:
• Your hair is washed, and then sprayed with pH balanced water, which prepares your hair to accept the neutralizing solution.
• Pre-treatment protection is applied to your hair to prevent it from being damaged.
• The first chemical applied to your hair softens it and makes each strand stretchier.
• The neutralizers is washed out and the hair is rinsed through with hair water.
• The hair is divided into small sections and straightened using hair irons. This can take around two hours for medium length hair.
• Another chemical is applied which sets the hair in its current shape – completely straight. This is left on for quarter of an hour before it is rinsed off and more hair water is sprayed through the hair.
• The hair is blow dried and the hair straightness are quickly run through the hair to provide a sleek and glossy finish.
If your hair is coloured or bleached the Yuko treatment can still be applied, however you will have to wait at least two weeks before it can be performed. Once the treatment has been applied to your hair it is highly important that you do not wash it for 48 hours and also avoid tucking it behind your ears and tying it up.
If you are hoping to have the Yuko treatment applied to your hair then it is important that you have a consultation with your hair dresser/stylist to ensure that your hair is in a suitable condition to have the treatment applied.
Helen is the web master of ARCH Building Solutions, home of all your Electrical Installation needs.

How to maintain patent leather bag

How to maintain patent leather bag

   Ladies love handbags not only because they can install things, but also they are eye-catching.But many of us lack the knowledge of good maintanence. And cheap designer handbag is a very popular material in recent years. But how to properly care and daily maintenance of patent leather bags and let it to be fresh permanently?According my personal experience  and experts’ advice, I summary the following tips which is simple but ignored by most of us.

  Say popularly, enameled leather is patent leather. In general, whether natural leather or synthetic leather, they can reach smooth as a mirror and shiny by type of treatment, while have eye-catching effect. This effect is produced by coating it with chemical products similar to pitch, such as coach handbags and Vernis. Flat patent leather, patent leather wrinkles maintenance methods, in general, surface dust can be used to clean with wet cloth. But remember not to use a wet cloth which can squeeze water because too much water is also very easy to immerse the leather, causing leather injury. Of course, we can use leather cleaner or clean paste to care, but avoid brightening agent or shoe cream. Brightening agent will cause coating peel off.

   Here to tell you clean cheap patent tips. Wiping with a paper towel dipped balm ensure not to harm the skin and well polished. When they are not in use, dust bag or sack can be used for packing to the purpose of dust moisture. Avoid using plastic bags because it is airtight and damage patent leather bag.

Is the brazilian blow dry safe

Is The Brazilian Blow Dry Safe?

The Brazilian Blow Dry treatment is a revolutionary hair straightening system that uses keratin instead of chemicals to achieve amazing results. The treatment smoothes even the frizziest, curliest hair and reverses any damaged areas of the hair shaft. Unlike other straightening treatments that can damage hair, the Brazilian Blow Dry actually improves the condition and the health of the client’s hair. This is because it uses keratin which is a protein high in sulphur and cystine that is naturally found in hair and nails. This is combined with formaldehyde to form the straightening solution which is then fused onto the outer layer of hair with a very hot flat iron. The result is silky, smooth and manageable hair that lasts for approximately three months.

 Even though the treatment is very effective at straightening and repairing any damage to the hair shaft, the use of formaldehyde in the process has caused controversy as it can pose possible health dangers. Firstly it is important to understand that there are small amounts of formaldehyde present all around us. The substance occurs naturally and is found in many man-made products. However, these small amounts of formaldehyde used in manufactured products do not cause problems as it breaks down slowly under normal circumstances and is not rapidly released into the environment.  

 However, when exposed to heat and moderate levels of humidity the breakdown process of formaldehyde is accelerated thus releasing the chemical into the atmosphere. Experts find the use of formaldehyde particularly problematic as the substance can bond and stick around for quite a long time, meaning that is can be hard to wash out in a few shampoos. The major concern is that the chemical could accumulate on the hair over time and then could be re-released every time the hair comes into contact with water or heat. If a person was to use the Brazilian Blow Dry as a long-term solution to straightening hair then this would result in long-term exposure to the substance and possible accumulation on the hair.

 So what problems can exposure to formaldehyde cause? More than others, some people are just naturally highly sensitive to formaldehyde and others that are not as sensitive may over time develop an allergy to it. It is part of the chemical’s make up to stir up the immune system and cause sensitivity so it can be hard to protect ones self. The symptoms of sensitivity to the chemical include a runny nose, sore throat, headache, itching and irritated eyes. These symptoms usually indicate a low level of exposure. The chemical is also a known carcinogen and smokers in particular may be at a greater risk of contracting cancer of the airways, including nasal passages when exposed to formaldehyde.

So, is there anyway that we can protect ourselves? Well firstly if you are a pregnant women, a person with diminished lung function or person who is know to be formaldehyde sensitive then you should just avoid the Brazilian Blow Dry treatment altogether. You must make a great effort to avoid exposure as this is the best way to stay safe. If you do decide to go ahead with the Brazilian Blow Dry treatment you must make sure that you are completely aware of the risks involved by having an in-depth consultation with your stylist. If you are in any doubt you must not hesitate to ask, after all it is your health that is at risk.

If you work as a stylist in a salon that performs the Brazilian Blow Dry treatment or if you perform the treatment yourself, you must make sure that you are protected by wearing gloves when handling the chemical as you are as just as at risk as your clients. Also installing a proper ventilation system can help. If during the straightening process you experience any of the symptoms associated with low levels of exposure you should try and get some fresh air and if the product is already on the hair you should ask the stylist to ventilate the room and rinse the product out of hair as soon as possible. You need to keep an eye on your health after the treatment and if you experience any shortness of breath, accompanied by hives or burning sensations around your head you need to see a doctor straight away and make sure you are in a ventilated area if possible.

If you are worried about formaldehyde exposure then there are other ways that you can straighten your hair without chemicals. Invest in a good pair of ceramic straightners; just remember to protect your hair with a good heat protection spray beforehand. 

If you do decide to go ahead with the Brazilian Blow Dry treatment then there is no better place to have it done than at Inanch salon in London. For more information and to book a consultation today click  here!