Keys to choosing plate roll machines

5 Keys To Choosing Plate Roll Machines

Between diminishing factory orders and increasing labor and energy costs, companies that use plate metal in their fabricating processes are finding their profit margins increasingly pinched.
Yet, manufacturers must still invest in new production equipment — whether to replace obsolete equipment or to take advantage of new business opportunities — in order to remain competitive.
Manufacturers must make careful assessments when evaluating the addition of new plate-rolling equipment. Debt capital is still available to purchase new machinery, but paying back the loan will not yield a satisfactory return on investment unless the equipment adds value to the production. Unfortunately, many buyers end up purchasing equipment that lacks the capability and flexibility to meet production volumes and tolerances, simply because they don’t understand all available options and considerations.
In an effort to help manufacturers optimize plate rolling operations, 5 key considerations are offered in order to choose a proper plate bending machine. 
1. Factor in the properties of the material to be rolled
Even though drawings call for a plate to be rolled down to the same dimensions, a tougher material will require a much higher-rated rolling machine. In absence of such considerations, defects will result and the manufacturer will end up with excessive scrap.
Today’s steel is much stronger and requires more strength to bend. Thanks to detailed classifications by the American Society of Mechanical Engineers, countless varieties of steel abound: A36, A516 grade 70, Hardox 400/500 series and AR 200/300 series, for example. And these different steels require varying pressures to roll. 
A metal’s temper and yield strength must be matched with the customer’s application to correctly determine the specifications of the plate roller. This is especially important since steel characteristics have changed drastically over the past couple of decades. What was once known as mild steel no longer exists.
2. Work with an equipment dealer that is willing to discuss your specific plate-rolling needs
Customers must know the correct questions to ask, in order to get the correct answers. Each manufacturer faces unique challenges, and through systematic querying an astute sales representative can determine exactly what equipment will work best for their process.
Manufacturers must also carefully consider whether they wish to roll conical or parabolic shapes to take advantage of a broader market. Hydraulically operated four-roll machines are ideal for this type of work by eliminating surface scarring, thereby decreasing the need for grinding the lamination (bullnosing) on the minor diameter edge of a cone.
Accurate conical rolling is further achieved through features such as torsion bar parallelism, as opposed to electronic systems or proportional value systems that merely maintain a theoretical balance. Finite parallelism allows the machine to be adjusted to its full conical tilt and back to parallel in only five seconds.
Customers need to discuss issues such as inside diameters, material type, tolerances and the desired shape of the finished product. As an example, some products, such as those found in the pressure vessel industry, demand a maximum of 1 percent out-of-round on their diameters or they are considered defective. By using an underpowered plate roller, too much of a barrel effect can render such a product useless and quickly erase any potential profit margin.
Matching plate-rolling equipment to the specific needs of a manufacturer requires attention to detail. It is imperative that the dealer you work with is willing to sit down with you and discuss the specific needs of your business. There are many issues that need to be addressed, many of which a purchasing manager may not initially foresee.
3. Stay within ideal operating parameters of the machine
It is recommended that manufactures identify what material and what thickness represent their highest volume of work. Then (a company) can deliver a machine that will camber to that specification, thus conserving valuable production hours and eliminating large amounts of scrap.
Quality rolling machines are usually cambered at 50 percent of the full-rated value of the machine. Hence, a 1-inch machine is cambered to roll 1/2-inch plate at a nearly perfect edge. Disregarding this important fact can result in out-of-spec product that the customer will not accept. Problems most commonly arise when rollers attempt to push the upper limits of their plate roll. If 5/8-inch plate is rolled through a 1-inch-rated machine, a small degree of barrel effect will likely occur. This may or may not be an acceptable margin for error. However, when plate thickness approaches the upper end of a machine’s rating, then severe defects can occur. Unless corrected with a shim, it will not be sellable. Conversely, when very thin material is rolled through a machine rated for very thick plate, the finished product may come out tighter in the center than at the ends. Again, time consuming shimming is necessitated to correct for this “hourglass” effect.
4. Carefully consider bending diameters
The tighter the diameter, the more bend pressure required. For instances where thick material must be rolled into tight inside diameters (ID), the diameter of the top roll and the layout of the machine can make the difference between a product whose cylindrical edges meet and one that won’t close.
As a rule of thumb, most machines can roll plate at 1 1/2 times the upper roll diameter. Hence, given a 10-inch-diameter top roll, inside diameters as tight as 15 inches can be obtained. However, new machines that incorporate planetary guides are able to keep approximately 50 percent more area of the plate under bend-pressure during the rolling operation, thereby achieving ratios of 1.1 times the upper roll diameter. This creates a 30 percent advantage on tight diameters. 
All machines achieve precise measurements at 50 percent of the full-rated value. Therefore, given a 1.1 roll geometry, a 3/8-inch machine with a 10-inch top roller can consistently roll 3/16-inch plate to 11-inch ID without any barrel defect.
5. Incorporate both side and vertical supports to prevent unwanted bends
Adequate support requires both side and vertical roller-supports, as designed by the manufacturer of the plate-rolling machine. Once employed, plate rolling becomes a one-man job instead of two. This frees up valuable manpower that can be re-routed to other jobs.
When rolling a cylinder, once the inside diameter is more than 200 times greater than the thickness of the material, the weight of the material becomes sufficient to bend the cylinder as it exits the top roll and gets further away from the machine. Without proper support, unwanted radii result. Purchasing a machine with both side and vertical roller supports easily solves this problem.Some manufacturers attempt to skimp on this ancillary equipment by resorting to “makeshift” support such as a forklift or overhead crane. However, this shortcut ties up the use of equipment that can best be utilized elsewhere. Because it cannot adequately support the material, unforeseen bends can still appear.

The source of lead pollution in greenland

The Source Of Lead Pollution In Greenland

Lead deposits, which accumulated in soil and snow during the 1960’s and 70’s, were primarily the result of leaded gasoline emissions originating in the United States. In the twenty years that the Clean Air Act has mandated unleaded gas use in the United States, the :ad accumulation world-wide has decreased significantly.

A study published recently in the journal Breitling Replica Watches Nature shows that air-borne leaded gas emissions from the United States were the leading contributor to the high concentration of lead i the snow in Greenland. The new study is a result of the continued research led by Dr. Charles Boutron, an expert on the impact of heavy metals on the environment at the National Center for Scientific Research in France. A study by Dr. Boutron published in 1991 lowed that lead levels in arctic snow were declining.

In his new study, Dr. Boutron found the ratios of the different forms of lead in the leaded gasoline used in the United States were different from the ratios of European, Asian id Canadian gasolines and thus enabled scientists to differentiate the lead sources, he dominant lead ratio found in Greenland snow matched that found in gasoline from the United States.

In a study published in the journal Ambio, scientists found that lead levels in soil in .e North-eastern United States had decreased markedly since the introduction of unleaded gasoline.
Many scientists had believed that the lead would stay in soil and snow for a longer period.
The authors of the Ambio study examined samples of the upper layers of soil taken on the same sites of 30 forest floors in New England, New York and Bulgari Replica Pennsylvania in ’80 and in 1990. The forest environment processed and redistributed the lead faster than e scientists had expected.
Scientists say both studies demonstrate that certain parts of the ecosystem respond rapidly to reductions in atmospheric pollution, but that these findings should not: used as a license to pollute.

Instant transformation for your eyes with colored contacts

Instant Transformation For Your Eyes With Colored Contacts

Colored contacts have become a trend today. They are preferred by many people today as they will provide a fashionable look and also correct their vision. We always try to look better and add a pinch of style to us. Colored contacts will give a new look to you and you can choose from various colors  available. Some people do not like the original color of the eyes and always feel that they would look better if they had other color. For such people colored contacts are the best choice.  They can wear colored contacts of their choice and enhance the beauty of their eyes.
You can find these colored contacts in various colors like blue, green, brown and many others. It is always suggested that you see an eye specialist before you plan for colored contacts. An eye specialist can explain you how to care for your eyes and contacts, which type of contacts, are right for you and more.   
The colored contacts come in 2 types which are opaque and enhancement lenses. The opaque lenses can change the color of your eyes completely. The enhancement lenses are for enhancing the natural color of your eyes. They also said to help in better vision.
You can also get various no prescription colored contacts for the people with 20/20 vision.  These lenses do not have any corrective properties and are perfect for people with normal vision. These lenses can be used by any one who wishes to chance their eye color. Many young adults would like to change their eye color due to various reasons like to giving a new look to themselves or to make someone feel that they look pretty with their new eye color or any other. Here could be plenty of reasons behind it but you should choose the lenses which will suit you.
There are disposable colored contacts available today. These disposable contacts are easy to wear. You can simply wear them and dispose them on daily or a weekly basis. These lenses are expensive than the regular long term contact lenses. But it will save you time and also the effort. You will have to clean your long term contact lenses every day. You will have to put them in disinfectant solution to clean them every day and this will also cost you quite a bit. The difference in the price between long term contacts and disposable lenses might not be too much when you look at the comfort offered by the disposable contacts.

<input id=”gwProxy” type=”hidden” /><input id=”jsProxy”>

Ultrasonic cavitation faqs

Ultrasonic Cavitation FAQs

What is ultrasonic cavitation?

It’s a relatively new non-surgical technique, that allows you to reduce localized adiposity, tearing the connections of the fat cells, that will eventually disposed through the urinary ways.

Since when is it practiced in the world?

The cavitation in aesthetics was introduced for the first time  in Milan in 2005, even if the physic phenomenon called cavitation is known since the 60s.

Is ultrasonic cavitation painful?

No, it’s painless. Little reddening may occasionally appear but don’t cause pain. The heat generated by the light is perfectly tolerable.

Is it a safe treatment?

Yes. It’s a non-surgical procedure, without anesthesia, non-invasive (there are no cuts, scars, or post-operatory course) and allows you to do your social life before and after the sessions. Always remember to choose carefully the center where you’re going to take the treatment.

In which areas is the ultrasonic cavitation more effective?

All the parts of the body where localized adiposity is; therefore legs, abdomen and buttocks are the most appropriate but there’s no real limitation regarding body areas.

Is it possible to loose weight with ultrasonic cavitation?

Ultrasonic cavitation is not a method to loose weight but to shape the body. It is particularly indicated to reduce adipose panniculopathy, the so-called “fat cushions” in case these won’t go away with diets and exercise.

Which are ultrasonic cavitation contraindications?

There are no particular contraindications, even if people with cardiac or vascular problems, pacemaker carriers and pregnant or breastfeeding women should avoid to undergo it. Always ask a doctor before taking any decision.

Are the results similar to a liposuction?

Yes, fat is removed and won’t appear again in the treated areas, without harming the vascular system and without post-operatory course.

How is it possible to remove solid fat through urine?

The ultrasonic cavitation emulsifies fat, and coverts it into a liquid substance easy to remove through the lymphatic and urinary systems.

Is any previous or subsequent treatment needed?

A low-calorie diet is suggested and id mandatory to drink at least 1.5 liters of water before and after sessions: Drink water is essential to eliminate water.

How much time should pass between two sessions?

The body eliminates fat in 72 hours, so between two session 4 days should pass.

How many sessions of ultrasonic cavitation are needed?

Between 8 and 12. Results can be seen from the third session.

Is it possible to improve the results?

Yes, applying carnitine and phosphatidylcholine based gels during the sessions.